Key Takeaways
- 1Don’t buy past the RTX 5050 for a 1080p build: the bottleneck calculator rates it the fastest card the 5600X still keeps balanced at that resolution, and anything quicker just idles waiting on the chip.
- 2At 1440p, the RTX 5060 Ti 16GB is the ceiling pick, averaging a modelled 84 FPS across 9 demanding games at High detail while staying at just 9% CPU-bound.
- 3The 5600X beats both its direct 2020 rivals on speed and value: PassMark’s CPU Value puts it at 145.5 against 98.2 for the Core i5-10600K and 69.9 for the Core i7-10700K, and it costs $149.99 against the i7’s $264.28.
- 4If a faster GPU is already bought or planned, don’t replace the platform. A Ryzen 5700X3D or 5800X3D drops into the same AM4 board (one owner reports paying $349 or less) and raises the gaming ceiling without a new motherboard, memory, or cooler.
- 5Buying 4K hardware resets the math entirely: the RX 7800 XT reads 15% GPU-bound with this chip, and even the RTX 5090 settles to 2% CPU-bound (pcbottleneck) or 0% (Bottleneck Calculator) once the resolution is high enough.
The 5600X sits on AMD’s Zen 3 architecture, built for the AM4 socket the company had already been running since well before 2020. It’s a 6-core, 12-thread part, with a base clock of 3.7 GHz that AMD’s boost algorithm pushes up to 4.6 GHz under load, all inside a 65W TDP that keeps cooling requirements modest. cpubenchmark lists it at $149.99, a price that puts it squarely in budget territory and sets the bar every comparison in this piece has to clear.
| Socket Type | AM4 |
| CPU Class | Desktop |
| Clockspeed | 3.7 GHz |
| Turbo Speed | Up to 4.6 GHz |
| # of Physical Cores | 6 (Threads: 12) |
| Cache | L1: 384KB, L2: 3.0MB, L3: 32MB |
| TDP | 65W |
| Price | $149.99 |
| First Seen on Chart | Q4 2020 |
| CPU Rank | 941 |
Cache is where the spec sheet stops looking like a budget part. The 5600X carries 384KB of L1, 3.0MB of L2 and 32MB of L3, and that last figure dwarfs what either Intel chip in this comparison brings: the i5-10600K holds 12MB of L3, the i7-10700K 16MB. Twice the L3 of the chip AMD’s own part most directly competes with on price, and double again against the step-up i7, is not a small gap.
No Graphics Output Without a Discrete Card
cpubenchmark lists no integrated graphics for the 5600X at all, while both the i5-10600K and the i7-10700K carry Intel UHD Graphics 630. That’s not a benchmark number anybody needs to interpret: it means a 5600X build has nothing to put a picture on screen with until a discrete GPU goes in the case. Anyone pricing this chip against the Intel pair has to price in a graphics card on top, something neither Intel option strictly requires.
The 5600X has been on PassMark’s charts since Q4 2020, and 6 years of submissions shows: 36,610 samples sit behind its numbers, out of 47,144 total across all 3 chips in this comparison. That’s most of the pile, and it means the figures used against the i5-10600K and i7-10700K in the sections ahead rest on a result set with far more hours of testing behind it than either Intel chip alone could supply. For all that data, PassMark still ranks the 5600X 941st overall, a reminder that 6 years of production have moved the rest of the field well past a budget 2020 chip even where it continues to win its original fights.
6 Cores Against 6 Cores: the i5-10600K
The Core i5-10600K matches the 5600X core for core, 6 physical cores and 12 threads on both chips, and on paper it should have the edge: the Intel chip starts at a 4.1 GHz base clock and turbos to 4.8 GHz, both numbers ahead of the 5600X’s 3.7 GHz base and 4.6 GHz boost. None of that shows up in PassMark’s CPU Mark, where the 5600X scores 21,820 against the 10600K’s 14,237, a deficit of 34.7% for the chip running the higher clocks. Whatever those extra megahertz are doing, they aren’t turning into throughput.
CPU Mark Rating
Single thread is where the gap closes to 13.5%: the 10600K’s rating of 2,910 sits that far behind the 5600X’s 3,366, a much smaller margin than the 34.7% it trails by once all 12 threads are working. Clock speed alone doesn’t explain even that narrower gap, since the Intel chip is still clocked higher per core and still losing. The difference is cache. The 5600X carries 32MB of L3, the 10600K just 12MB, and that’s a lot more room for a core to find what it needs without reaching out to slower memory.
| Spec | AMD Ryzen 5 5600X | Intel Core i5-10600K @ 4.10GHz |
|---|---|---|
| Price | $149.99 | $145 |
| Clockspeed | 3.7 GHz | 4.1 GHz |
| Turbo Speed | Up to 4.6 GHz | Up to 4.8 GHz |
| # of Physical Cores | 6 (Threads: 12) | 6 (Threads: 12) |
| L3 Cache | 32MB | 12MB |
| CPU Mark | 21820 | 14237 |
| Single Thread Rating | 3366 | 2910 |
| CPU Value | 145.5 | 98.2 |
| CPU Rank | 941 | 1423 |
| # of Samples | 36610 | 2326 |
| Other | — | Intel UHD Graphics 630 |
The 10600K lists at $145, a few dollars under the 5600X’s $149.99, so the two compete on close to equal footing on price but nowhere close to it on what that price buys. PassMark’s CPU Value metric puts the 5600X at 145.5 against the 10600K’s 98.2, and its overall CPU Rank places the 5600X at 941 against 1423 for the 10600K. At near-identical money, one chip is simply the better buy.
Reading the Numbers Carefully
Two things worth flagging before taking that 34.7% gap at face value. The 10600K’s PassMark score rests on just 2,326 submitted results against 36,610 for the 5600X, so it’s the far thinner sample of the two. And the 10600K does have one thing the 5600X doesn’t: Intel UHD Graphics 630 built in, which means a display signal without a graphics card installed, something the 5600X can’t offer.
8 Cores and 5.1 GHz: the Core i7-10700K
Intel brings more of everything to this matchup. The Core i7-10700K packs 8 cores and 16 threads against the 5600X’s 6 cores and 12 threads, and it boosts all the way to 5.1 GHz, the highest clock speed of any chip in this comparison, well clear of the 5600X’s 4.6 GHz ceiling. On a spec sheet, this is the one that’s supposed to win.
CPU Mark
It doesn’t. The 10700K’s 2 extra cores and 4 extra threads should matter most in a multi-threaded test, and CPU Mark is exactly that, yet it scores 18,478 against the 5600X’s 21,820, a gap of 15.3% in the 6-core chip’s favor. That result comes off 8,208 submitted samples, enough to call it a settled number rather than a fluke run.
Single Thread Rating
The core count story has an explanation, even if it’s not a flattering one for Intel; the clock speed story doesn’t. Single-threaded work should reward whichever chip clocks higher, and the 10700K’s 5.1 GHz boost beats the 5600X’s 4.6 GHz by 500 MHz, yet it still lands at 3,035 against 3,366, 9.8% behind. That’s Zen 3 getting more work done per clock cycle than Skylake’s descendants manage, clock speed advantage or not.
| Spec | AMD Ryzen 5 5600X | Intel Core i7-10700K @ 3.80GHz |
|---|---|---|
| Price | $149.99 | $264.28 |
| Cores / Threads | 6 / 12 | 8 / 16 |
| Clockspeed | 3.7 GHz | 3.8 GHz |
| Turbo Speed | Up to 4.6 GHz | Up to 5.1 GHz |
| Cache | L1: 384KB, L2: 3.0MB, L3: 32MB | L1: 512KB, L2: 2.0MB, L3: 16MB |
| CPU Mark | 21,820 | 18,478 |
| Single Thread Rating | 3,366 | 3,035 |
| CPU Rank | 941 | 1143 |
| CPU Value | 145.5 | 69.9 |
| # of Samples | 36,610 | 8,208 |
Price is where the case against the 10700K closes. PassMark lists it at $264.28 against $149.99 for the 5600X, nearly double, for a chip that loses both the multi-threaded and single-threaded benchmarks. Run that through PassMark’s own value metric and the 10700K scores 69.9, the worst CPU Value of the three chips compared here, against 145.5 for the 5600X. Its overall CPU Rank of 1143 sits behind the 5600X’s 941 too, which is PassMark’s way of saying this isn’t close.
Cache is the one spec where the comparison isn’t a clean sweep for AMD. The 10700K carries more L1, 512KB against the 5600X’s 384KB, but that’s the smallest and least consequential pool on either chip. Where it counts, the 5600X doubles the 10700K’s L3, 32MB against 16MB, and adds a full megabyte of L2 on top. That larger last-level cache is a big part of why Zen 3 keeps pulling ahead in the kind of game workloads this comparison is really about.
Running Costs and the Heat Question
Powering the 5600X for a year costs $11.86, according to PassMark’s estimate, while keeping either Intel chip running costs $22.81, almost exactly double. The gap traces straight back to the TDP ratings on the spec sheet: 65W for the 5600X against 125W for both the i5-10600K and the i7-10700K, nearly a 2x difference that shows up almost unchanged in the yearly bill. PassMark puts the 5600X’s draw at 47.5 kWh a year against 91.3 kWh for either Intel chip, and the daily numbers ($0.033 versus $0.063) are small change on their own. What they’re useful for is the ratio, not the dollars: the 5600X earns back a little more of its case for an upgrade cycle every year it keeps costing half as much to feed.
| AMD Ryzen 5 5600X | Intel Core i5-10600K @ 4.10GHz | Intel Core i7-10700K @ 3.80GHz | |
|---|---|---|---|
| Max TDP | 65W | 125W | 125W |
| Power consumption per day (kWh) | 0.13 | 0.25 | 0.25 |
| Running cost per day | $0.033 | $0.063 | $0.063 |
| Power consumption per year (kWh) | 47.5 | 91.3 | 91.3 |
| Running cost per year | $11.86 | $22.81 | $22.81 |
What these numbers don’t measure
None of this comes from a chip actually plugged into a wall meter. PassMark interpolates the figures straight from each chip’s max TDP rating and assumes a nominal 25% load, which is a modeling choice, not a measurement, and PassMark says as much by noting that real CPU power profiles vary. The dollar totals also sit on top of an electricity price range running from $0.15 to $0.45 per kWh, a 3x spread before the chip itself enters the picture. Treat the comparison between chips as sound, since all three are run through the same assumptions, but treat any single dollar figure here as a rough placeholder rather than a bill.
None of that running-cost math answers the question most 5600X owners actually show up with. A 65W TDP rating describes power draw and a yearly bill, not what the chip reads on a sensor once it’s loaded up, and owners who push it hard find that out the hard way – at which point the conversation turns to coolers.
Thank you for your response. after uncapping my FPS I hit 96 degrees Celsius… are there any things I need to look for in a CPU cooler? Never bought one;)
The 1080p Ceiling: RTX 5050 to RTX 3060
At 1080p the graphics card has the least amount of work to do per frame, which is exactly why this column exposes the 5600X’s ceiling before any other resolution does. Push the resolution down and the chip has to feed frames faster than the GPU can slow it down, so this is where its limit shows up first. On the bottleneck calculator’s own numbers the RTX 5050 sits at 9% CPU-bound at 1080p, the highest card on the list that still counts as balanced with this chip, which puts it at the top of the 5600X’s 1080p range.
At the other end of that range sits the RTX 3060, the slowest card on the market today that still clears 60 FPS at 1080p High, averaging about 74 FPS in reviewers’ testing. Its CPU bottleneck figure is lower still, just 4%, but that number isn’t a compliment to the 5600X: it means the RTX 3060 itself is the slower half of the pairing, leaving the CPU with headroom to spare rather than work to do.
1080p CPU bottleneck with the Ryzen 5 5600X
Climb past the RTX 5050 and the CPU-side percentage keeps climbing with it: 13% on the RX 7600, 15% on the RTX 4060, 17% on the Arc B580, and 19% on the RTX 5060, all measured on the bottleneck calculator’s default settings. None of that buys a 1080p gamer more frames; it buys a graphics card that spends more of its time waiting, since at this resolution extra card speed mostly shows up as lower GPU usage rather than a higher number on the frame counter.
Buying Past the 5050 at 1080p
Every dollar spent on a faster card than the RTX 5050 turns into idle GPU time at 1080p, not extra frames – the 5600X simply can’t feed it any faster. That spending isn’t wasted outright: the same card pays off the moment you move up to a higher-resolution monitor, where the graphics card becomes the limiting factor instead of the chip.
That pattern (the CPU running out of room while the graphics card sits underused) matches what people actually running these chips report. AM4 hardware bought secondhand is still carrying the newest games without complaint, at prices that make the platform hard to walk past.
Snagged a 5600 recently for $100. I’m genuinely impressed with the AM4 platform. It holds up in the newest games without a hitch.
The 1440p Pick: RTX 5060 Ti 16GB
Move up to 1440p and the bottleneck calculator hands the 5600X a different verdict: the RTX 5060 Ti 16GB is the best card it still rates balanced at this resolution, sitting at just 9% CPU. Paired with it, the chip averages 84 FPS across 9 demanding games run at High detail, a modelled figure rather than a single benchmark pass, but it’s the number that makes the RTX 5060 Ti 16GB the pick for anyone building around the 5600X at 1440p rather than settling for something slower.
Average FPS at 1440p, High, nine demanding games
Below the RTX 5060 Ti 16GB, the calculator’s reasoning shifts card by card. The Arc B580 is the last one still limited by the GPU at 1440p, at just 2%, and everything faster than it flips the bottleneck onto the CPU: the RTX 5060 sits at 1% CPU, the RTX 4060 Ti at 3%, the RX 9060 XT 16GB at 4%. All of them, along with the RX 7600 further down, still carry the same ‘good at 1440p+’ tag the 5060 Ti does, so picking among them isn’t about avoiding a bottleneck anymore. It’s about how much frame rate and VRAM the budget buys.
| Pairing | 1080p | 1440p | 4K |
|---|---|---|---|
| Ryzen 5 5600X + RTX 3070 | 21% | 3% | 25% |
| Ryzen 5 5600X + RX 6800 XT | 28% | 13% | 17% |
The same pattern shows up in cards plenty of 5600X owners already have in their systems. At 1080p, the RTX 3070 pairing comes back 21% CPU and the RX 6800 XT pairing 28%, both numbers lopsided enough to flag the chip as the limiting factor. Push either one to 1440p and the figures collapse to 3% and 13%. The resolution did more to rebalance these pairs than a new CPU would have.
The 4K Pick: RX 7800 XT
At 4K, the math behind every pick so far reverses. More pixels means more work for the card on every single frame, while the 5600X’s job barely changes, so the ceiling that capped it at 1080p and 1440p lifts. The bottleneck calculator puts the RX 7800 XT at 15% GPU-side paired with this chip at 4K, which is the balance a buyer wants: the card, not the CPU, is now the one setting the pace. That same RX 7800 XT averages 99 FPS at 1440p, so this isn’t a weak card finally catching up to a strong CPU; it’s a genuinely fast card that only gets to show it at 4K.
The RTX 4070 and RTX 5070 make the flip explicit. Both get tagged 4K only, and the 1440p numbers show why: the RTX 4070 sits at 12% CPU at 1440p and the RTX 5070 at 17% CPU, meaning the 5600X is still the limiting part at that resolution. Push the RTX 5070 to 4K and it comes out 14% GPU instead – the same pairing, the same chip, but the bottleneck has moved sides entirely. Below 4K, this CPU holds the RTX 5070 back; at 4K, it doesn’t.
Bottleneck at 4K with the Ryzen 5 5600X – percent GPU-side
Climb the 4K-only tier above the RX 7800 XT and the percentages keep shrinking: the RX 9070 XT lands at 7% GPU, the RTX 4080 Super at 6%, the RX 7900 XTX at 4%, the RTX 5080 at 3%, and the RTX 4090 at just 1%. Faster card after faster card, and the figure keeps closing in on zero rather than growing, because each of these cards takes on more of the per-frame work than the last, leaving the 5600X with proportionally less to do. By the time you reach the RTX 4090, this 6-year-old chip is about as close to balanced with a flagship GPU as it will ever get, and that’s a function of 4K’s workload, not of the CPU suddenly getting faster.
Drop back to 1440p with those same cards and the ceiling reappears. The RTX 4090 averages 129 FPS, the RTX 5090 also averages 129 FPS, and the RTX 5080 averages 127 FPS – 3 cards with very different price tags and very different horsepower, landing on nearly the same number with this chip. The cards only separate again once you move up to 4K, where the extra horsepower in the RTX 5090 and RTX 4090 finally has room to matter.
Buying past the 5080 only pays off at 4K
If your monitor runs at 1440p, the RTX 4090 and RTX 5090 both average 129 FPS with this chip – the same number, set by the 5600X rather than by either card. Spend the extra money on either of them anyway only if you’re running 4K, where that same horsepower finally gets used instead of wasted.
The RTX 5090 Pairing: Two Calculators, Two Verdicts
Put the 5600X in front of the RTX 5090 and you’re asking a 2020 six-core to feed the fastest consumer card on sale. pcbottleneck lists the 5090 at 104.8 TFLOPS with 32 GB of VRAM on board and a 575W TDP, numbers that belong to a different class of hardware than anything the chip has been paired with so far in this piece. This is the pairing where any gap between the chip and the card shows up largest, and it’s also the one place where the two tools measuring that gap can’t agree on how big it is.
| Resolution | Bottleneck Calculator | pcbottleneck |
|---|---|---|
| 1080p | 38% CPU | 6% CPU-bound |
| 1440p | 28% CPU | 3% CPU-bound |
| 4K | 2% CPU | 0% CPU-bound |
At 1080p, the Bottleneck Calculator puts the chip’s cost at 38% CPU, while pcbottleneck puts the same pairing at just 6% CPU-bound. At 1440p the gap is nearly as wide: 28% CPU from the Bottleneck Calculator against 3% CPU-bound from pcbottleneck. Only at 4K do the two tools land close together, 2% CPU against 0% CPU-bound, both saying the pairing is effectively fine once the card is doing that much work per frame. These aren’t 2 measurements of the same thing disagreeing by rounding error; they’re 2 different models of how a bottleneck forms, built on different assumptions, and at 1080p and 1440p those assumptions produce verdicts more than six times apart.
Ryzen 5 5600X and RTX 5090 component scores by resolution (pcbottleneck)
pcbottleneck’s own component scores explain where its more forgiving numbers come from. The GPU sits pinned at 99 at 1080p and 100 at both 1440p and 4K, essentially maxed out at every resolution, while the CPU score drifts down from 74 at 1080p to 72 at 1440p to 69 at 4K. pcbottleneck names single-thread headroom as the specific constraint holding the chip back at 1440p, and it calls the 5600X the limiting part of this pair outright. The CPU score falling as resolution climbs looks backwards until you notice the verdict is improving at the same time: the chip isn’t getting faster, the card is just taking longer per frame, and that’s what closes the gap between them.
| Grade | S |
| Rated for | 1440p gaming |
| Confidence | 95% |
| Recommended PSU minimum | 1100W |
| Engine accuracy | 21.6% MAE on measured FPS |
For all that disagreement on the CPU-side percentage, pcbottleneck still hands this pair a Grade S for 1440p gaming at 95% confidence, and it sizes the power supply around it at a 1100W minimum. Set that confidence figure next to the one pcbottleneck publishes for its own engine, though: 21.6% mean absolute error against measured frame rates. A 95% confidence rating sitting on top of a model that misses measured FPS by more than a fifth on average is worth remembering every time one of these tools hands out a letter grade.
Swap the RTX 5090 out for an RX 7900 XT, an RX 7900 XTX or an RTX 4080 and the GPU score stays at 100 in every case. Once a card has pulled this far ahead of the 5600X, moving between flagships changes nothing on the scoreboard: the chip, not the card, is setting the ceiling.
pcbottleneck’s Per-Game List at 1440p
pcbottleneck breaks the 5090 pairing down into 10 popular games, each run at 1440p on high or ultra presets, and the spread across them is wide. League of Legends tops the list at 333 fps, while Starfield sits at the bottom at 91 fps, the one pcbottleneck calls out as the demanding title in the set. Both numbers come from the same chip and the same card, so the gap between them is really the gap between what an esports title asks of a 2020 six-core and what a modern open-world game asks of it – the card isn’t the variable here, the game is.
Ryzen 5 5600X + RTX 5090 at 1440p high, per game
Modelled, Not Measured
None of these 10 figures come from an actual benchmark run – pcbottleneck generates each one from a model and marks every single result low confidence. Read them as a picture of where this pairing roughly lands game to game, not as numbers anyone clocked on a test bench.
VRAM Needs and PSU Sizing for 2026
Video memory, not core count, is what decides whether a graphics card paired with the 5600X is still useful in 3 years. Bottleneck Calculator still clears 8 GB at 1080p on High settings in most games, but at 1440p that same 8 GB has already run out in several newer titles. Anyone buying a card to keep rather than replace next cycle should look at 12 to 16 GB instead, since that’s the range the guide treats as the safer pick once a chip this old starts getting paired with higher-resolution monitors.
Sizing a PSU for the 5600X
Bottleneck Calculator’s method for picking a power supply starts with the 5600X itself, which draws up to about 88 W. Add the board power listed for whatever graphics card is going into the build, then add 100 W to cover the motherboard, RAM, fans and storage. Take that total and add 25% on top for headroom, and the result is the minimum PSU wattage to buy.
Run that same sum with an RTX 5090 in the build and the numbers get serious: pcbottleneck lists the card’s TDP at 575W, and its recommendation for this pairing is a 1100W power supply at minimum. That figure comes from a 40% headroom allowance over the combined TDP of the two chips, plus the same 100W set aside for the rest of the system. The two guides don’t agree on the headroom number – 40% here against 25% from Bottleneck Calculator – and the gap matters here specifically because pcbottleneck says the extra margin exists to cover the RTX 5090’s transient power spikes, not just its steady-state draw.
| Input | Figure |
|---|---|
| Ryzen 5 5600X TDP | 65W |
| Ryzen 5 5600X peak draw | about 88 W |
| RTX 5090 TDP | 575W |
| Allowance for board, RAM, fans, storage | 100W |
| Headroom used by pcbottleneck | 40% |
| Headroom used by Bottleneck Calculator | 25% |
| Recommended PSU minimum, 5600X + RTX 5090 | 1100W |
Every bottleneck percentage pulled from this guide so far rests on the same three defaults: a Battle Royale workload, 16 GB of system RAM, and High detail settings. Change any one of those (a single-player title instead of a Battle Royale game, less RAM, or a step down to Medium) and the percentages move with it, so they describe this specific setup rather than a universal verdict on the chip.
Two Ways Off the 5600X
A 5700X3D or 5800X3D drops straight into the same AM4 board the 5600X already sits in, raising the gaming ceiling without touching anything else in the case: same motherboard, same memory, same cooler mount. pcbottleneck names both chips as the way to feed a faster graphics card without a platform change.
pcbottleneck’s own suggestion list for 5600X owners leads with two bigger AM4 chips on that same socket: the Ryzen 9 5900X, scoring 80, and the Ryzen 9 5950X, scoring 83, both measured against the 5600X’s 72. The socket stays put, but the jump in score is modest next to what’s coming next on the list.
The two Intel chips on that list score well clear of anything AM4 offers: the Ultra 5 245K reaches 96 and the Ultra 7 265K hits 99. Neither one drops into an existing build – both need the LGA1851 socket, which drags a new motherboard and a full switch to DDR5 memory along with it, on top of the chip’s own price.
| CPU | Score | Launch MSRP | Platform |
|---|---|---|---|
| AMD Ryzen 5 5600X | 72 | — | AM4 (current) |
| Ryzen 9 5900X | 80 | $549 | Same socket (AM4) |
| Ryzen 9 5950X | 83 | $799 | Same socket (AM4) |
| Ultra 5 245K | 96 | $319 | Platform change (AM4 → LGA1851) |
| Ultra 7 265K | 99 | $394 | Platform change (AM4 → LGA1851) |
Check This Before Buying a Drop-In Chip
pcbottleneck’s advice for anyone eyeing a 5700X3D or 5800X3D swap: check the motherboard’s CPU support list first, confirm the BIOS version it needs is already installed, and make sure the existing cooler and power delivery can actually handle the new chip. All three checks come before the purchase, not after it’s already in the socket.
Not every chip on pcbottleneck’s list is worth the money. The Ryzen 7 5700X scores 73, just one point above the 5600X’s 72, and both the Core i3-13100F and Core i5-11600K score 71, a point below it. Buying any of the three would mean spending money to land in roughly the same place the 5600X already sits.
What owners are actually weighing in the forums isn’t CPU scores at all, it’s memory and motherboard cost. RAM prices are what’s pushing people back toward staying on AM4 rather than jumping to AM5 or LGA1851.
I think the truth is that the RAM crisis means users would sooner upgrade the AM4 they have than upgrade to AM5 and need to get new RAM and MoBo as well. It’s not as good, but it’s a lot cheaper and it’s something.
The numbers behind that complaint are concrete. One owner shopping for new memory just paid $250 for a single 2×16 kit, a figure that makes a DDR5 platform jump look expensive before the new motherboard or CPU even enters the bill.
I just paid 250 US for 2×16 sticks (New)
Some owners have already made the drop-in swap and are reporting back on cost. One found the 5800X3D for $349 or less and says the chip alone, with nothing else in the build touched, was worth the money.
Just buying the 5800X3D and nothing else is worth it. I also had a 5600X and I did it a couple months ago. The cpu can be found for $349 or less.
Beyond the 5800X3D, owners also point to the 5600X3D and 5500X3D as cheaper AM4 upgrades, though both are harder to find in stock than the 5800X3D.
The 5600x3d and 5500x3d is also a good upgrade of you can find one.
6 Years On: Three Data Sets Agree
Line up all three data sets on the Ryzen 5 5600X and they tell the same story twice over. PassMark’s CPU Mark puts it at 21,820 against 14,237 for the Core i5-10600K and 18,478 for the Core i7-10700K, and the Single Thread Rating runs the same direction, 3,366 against 2,910 and 3,035. CPU Value, PassMark’s score-per-dollar measure, comes out at 145.5 for the 5600X against 98.2 for the i5-10600K and just 69.9 for the i7-10700K, and it gets there while priced at $149.99, cheaper than the $264.28 i7 and within $5 of the $145 i5. 6 years on, none of that has moved: the old fights the 5600X was built to win in 2020, it still wins.
| Measure | AMD Ryzen 5 5600X | Intel Core i5-10600K @ 4.10GHz | Intel Core i7-10700K @ 3.80GHz |
|---|---|---|---|
| CPU Mark | 21820 | 14237 | 18478 |
| Single Thread Rating | 3366 | 2910 | 3035 |
| CPU Value (CPU Mark / $Price) | 145.5 | 98.2 | 69.9 |
| Price | $149.99 | $145 | $264.28 |
| TDP | 65W | 125W | 125W |
| Yearly Running Cost | $11.86 | $22.81 | $22.81 |
The one fight the 5600X doesn’t win is against its own gaming speed ceiling. Feed it a GPU faster than it can keep up with, and the GPU sits idle waiting on the processor instead of rendering more frames, so money spent chasing a faster card past that point buys nothing the screen will show. That gap shows up most at 1080p and high refresh rates, not at 4K.
Pair the 5600X with the same RTX 5090 at 3 different resolutions and the bottleneck calculator hands back three different verdicts, simply because of arithmetic. A GPU’s workload scales with how many pixels it has to fill, while the CPU’s job per frame stays roughly fixed whatever the resolution, so the processor’s share of the pairing shrinks every time the resolution climbs. At 1080p the 5600X is 6% CPU-bound with the 5090 attached, at 1440p that falls to 3%, and at 4K it’s 0%: resolution, not the processor, decides who’s waiting on whom.
Ryzen 5 5600X + RTX 5090: CPU-bound by resolution
Push far enough up the resolution ladder and the ceiling stops mattering. At 4K even the RTX 5090 pairing reads just 2% CPU-bound in the GPU guide, and the RX 7800 XT named as the straight 4K pick elsewhere in this piece sits at 15% GPU, both comfortably inside balanced territory. For anyone building or keeping a 4K rig, there’s no current graphics card that makes a bad match for this chip once the resolution is high enough, the 5090 included.
Where these percentages come from
None of the bottleneck or FPS figures in this piece come from a bench run of the 5600X paired with these exact cards. They’re modelled, built on Tom’s Hardware’s GPU and CPU hierarchies and on TechSpot’s CPU and GPU scaling tests, and the engine behind them reports its own error rate against measured FPS at 21.6% MAE. Worth knowing before treating a figure like 3% CPU-bound as a precise measurement rather than a model’s best estimate.
Owners sitting on the 5600X right now are weighing exactly this, the AM4 platform’s remaining runway against the X3D chips still being sold for it. A 5800X3D drops into the same board and keeps someone on AM4 for years rather than forcing a platform change, and at least one owner has already made that call.
AM4 great platform I’m lucky enough to have 5800X3D – I’ll be keeping with it for the foreseeable future.




